Products

Solids Recovery and Classification

Hydrocyclones for Solids Recovery, Removal and Size Classification

FLSmidth Krebs' experience in solid particle recovery and classification using hydrocyclones is unparalleled. From our advanced gMAX™ Series Cyclones to our Close Packed DeSanders, Krebs delivers cutting edge technology and space-saving solutions for your solid / liquid separation needs.

Solids Recovery and Classification Products

Solids Recovery and Classification
Alloy and Specialty
Close Packed Cyclones
D-Series Super Cyclones
gMAX Series Cyclones
Heavy Media Hydrocyclones
High Density Pulp Cleaners
KCSS DeSanders
KD DeSanders
Krebs T-Series Classifying Cyclones
KS DeSanders
Sewage Degritting
Urethane
Water Only Hydrocyclones

gMAX Series FB Image 01

gMAX Series Image 02

gMAX Series Image 03

Krebs Alloy and Specialty Cyclones

Krebs Close Packed Cyclones

Krebs Close Packed Cyclones are compact, high capacity, centrifugal separators designed to efficiently separate fine solid particles from liquid. The vessel accommodates many individual hydrocyclones, each uniformly fed using one common feed nozzle,

Krebs D-Series Super Cyclones

FLSmidth Krebs has been providing elastomer lined hydrocyclones since 1952 to mining and other process industries. The Krebs Cyclone has been the standard design since then. Fully replaceable rubber liners inside metal housings were pioneered by Kreb

Krebs Heavy Media Hydrocyclones

Basically, heavy media hydrocyclones look like classifying hydrocyclones but they are instead used to clean coal. A gravimetric separation takes place due to the buoyancy effect of the media forcing the lighter coal solids to the center of the hydroc

Krebs High Density Pulp Cleaners

Krebs supplies pulp cleaners for the pulp and paper industry to remove dense contaminants from paper pulp. These units fall into two basic categories: continuous rejects cleaners that are usually installed in multiple stages to remove fine sand from

Krebs KCSS DeSanders

Krebs DeSanders and Separators are devices specially designed for the continuous removal of fine sand, scale and other undesireable solids from a liquid stream. Quality materials, advanced design and the finest workmanship assure the client of the hi

Krebs KD DeSanders

The KD model is a variation of the KS model. The KD model has a replaceable cone section that can be constructed of abrasion resistant plate, ceramic or high temperature food grade urethane. The KD model can also be constructed to operate under high

Krebs T-Series Classifying Cyclones

Krebs T-Series Classifying Cyclones are available in 10, 15, and 20 inch (254, 381, 508 mm) diameters. These hydrocyclones feature a unique lower cone arrangement that permits ultra fine separations ranging from a near 100 to 250 mesh (0.149 to 0.060

Krebs KS DeSanders

KS MODELS The KS model is Krebs' basic DeSander model. It is fabricated of carbon steel and has an abrasion resistant cone section. Krebs KS DeSander is capable of removing 99% of the +150 mesh sand and 90% of the +200 mesh sand entering the feed inl

Krebs Sewage Degritting

Krebs Sewage Degritting Cyclones are used exclusively in sewage treatment plants to remove grit, sand, and other inorganic solids from the primary clarifier or grit chamber underflow. Hydrocyclones are more efficient and cost less than gravity sedime

Krebs Urethane Hydrocyclones

Krebs Water-Only Hydrocyclones

Water-Only Cyclones are also used to "clean" (or "wash") raw coal. This hydrocyclone design relies on the fact that the mineral matter is denser than the coal. In this case the truncated cone bottom allows refuse bed to form which rejects lighter coa