Fuller-Traylor single and double toggle jaw crusher installations include some of the largest primary jaw crushers ever built. With over 500 successful installations, the Fuller-Traylor jaw crusher has been proven capable of withstanding the extreme conditions of the mining industry.
Both the single and double toggle jaw crushers are constructed of heavy duty fabricated plate frames with reinforcing ribs throughout. The crusher’s components are of high strength design to accept high power draw. Manganese steel is used for both fixed and movable jaw faces. Other jaw crusher features include the following:
Single Toggle
- Split frame design for ease of underground service and installation
- Large capacity, grease-injected, double-row spherical roller bearings
- Labyrinth seals with separate automatic lubrication system
- Heavy flywheels allow crushing peaks on tough materials
Double Toggle
- Split frame design for ease of underground service and installation
- Large capacity, heavy-duty, self-aligning, double-row, spherical roller bearings
- Taconite seals with separate automatic lubrication system
- Hydraulic toggle adjusting mechanism available
Single Toggle
Features: |
Sizes: |
Heavy duty fabricated plate frames, reinforced with ribs throughout |
34 x 43 |
(850 x 1100) |
All crusher components are of high strength design to accept high-power draw. |
36 x 47 |
(920 x 1200) |
Large capacity, grease lubricated, double row spherical roller bearings to ensure clean-running and long-life service. |
42 x 51 |
(1060 x 1300) |
Manganese steel for both fixed and movable jaw faces. |
46 x 55 |
(1160 x 1400) |
Heavy flywheels allow crushing peaks on tough materials. |
50 x 61 |
(1280 x 1550) |
Hydraulic toggle adjusting mechanism. |
55 x 67 |
(1400 x 1700) |
Overload protection mechanism supplied as standard. |
63 x 75 |
(1600 x 1900) |
|
69 x 83 |
(1750 x 2100) |
- Split frame design from underground service
- Labyrinth seals with separate automatic lubrication system
Double Toggle
Features: |
Sizes: |
Heavy duty fabricated plate frames, reinforced with ribs throughout |
36 x 48 |
(915 x 1220) |
Split frame designs for underground service |
42 x 48 |
(1070 x 1220) |
All crusher components are of high strength design to accept high-horsepower draw |
48 x 60 |
(1220 x 1525) |
Large capacity, heavy-duty self-aligning double row roller spherical bearings |
55 x 71 |
(1400 x 1800) |
Taconite seals with separate automatic lubrication system to ensure clean-running, long-life service |
67 x 85 |
(1700 x 2150) |
Manganese steel for both fixed and movable jaw faces |
73 x 91 |
(1850 x 2300) |
Hydraulic toggle adjusting mechanism |
|
|
Overload protection standard |
|
|